Table E.1
Priors for the joint modeling of photometric and RV data.
| Parameter | Distribution | TOI-2969 b | TOI-2989 b | TOI-5300 b | |
|---|---|---|---|---|---|
| P | [days] | Uniform | (0, 2) | (2, 4) | (1, 3) |
| T0 | [BJD] | Normal | (2459303, 1) | (2459302, 1) | (2459470, 1) |
| Rpl/R★ | Uniform | (0, 1) | (0, 1) | (0, 1) | |
| b | Uniform | (0, 1) | (0, 1) | (0, 1) | |
| ρ★ | [kg m−3 ] | Normal | (2136, 618) | (2092, 660) | (2345, 773) |
| q1,TESS(a) | Normal | (0.43, 0.02) | (0.45, 0.02) | (0.45, 0.02) | |
| q2,TESS(a) | Normal | (0.37, 0.03) | (0.39, 0.03) | (0.38, 0.03) | |
| q1,phot | Uniform | (0,1) | (0,1) | (0,1) | |
| q2,phot | Uniform | (0,1) | (0,1) | (0,1) | |
| e | Fixed | 0 | 0 | 0 | |
| ω | [°] | Fixed | 90 | 90 | 90 |
| K | [km s−1] | Uniform | (0, 100) | (0, 100) | (0, 100) |
| γTESS | Normal | (0.0, 0.1) | (0.0, 0.1) | (0.0, 0.1) | |
| σTESS | [ppm] | Loguniform | (0.1, 1000) | (0.1, 1000) | (0.1, 1000) |
| γphot | Normal | (0.0, 0.1) | (0.0, 0.1) | (0.0, 0.1) | |
| σphot | [ppm] | Loguniform | (0.1, 1000) | (0.1, 1000) | (0.1, 1000) |
| θ0,phot | Uniform | (−100, 100) | (−100, 100) | (−100, 100) | |
| γCORALIE | [km s−1] | Uniform | (−100, 100) | (−100, 100) | (−100, 100) |
| σCORALIE | [km s−1] | Loguniform | (0.001, 100) | (0.001, 100) | (0.001, 100) |
Notes. All ground-based photometric observations have the same priors for the limb darkening coefficients (q1,phot and q2,phot), the offset relative flux (γphot), the jitter (σphot), and the linear regressor (θ0,phot). A dilution factor was included only for TOI-2969, using a uniform prior from 0 to 1 for the ground-based photometry and the QLP light curves, and fixed to 1 for the other two targets and for the TESS-SPOC light curves.
(a) For TOI-2969 the q1 and q2 priors are shared between TESS and QLP, as it should be the same.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.